Sidewall belt conveyor with large dip angle is made by sidewall belt with diaphragm plate, and it is especially suitable for continuous transporting bulk materials in large dip angle, and widely used in coal, chemical industry, electric power, building materials, metallurgy, food, port, shipbuilding and other industries.The main characteristics of sidewall conveyor are as following.
(1) Big inclination conveying, saving the cover area of equipment, reaching the transport angle the ordinary, decorative belt conveyor cannot reach.
(2) Low cost, and can save 20% ~ 30% investment compared with the general belt conveyor can .
(3) Technical performance is superior compared with general belt conveyor, bucket elevator, scraper conveyor.
(4) The hoisting height is large, single vertical hoisting height is 500 m.
(5) Advanced technology, simple structure, smooth operation, safe and reliable to use, less equipment parts, less maintenance, low noise, flexible layout, and many other advantages. Sidewall belt conveyor with large dip angle is suitable for the working temperature of 15 ~ 40e, conveying various bulk materials in density of 0.15 ~ 319 t/m3.
(6) Can be layout in the angle of 0 ~ 90b. In the vertical conveying, also can rotate around 180b, and reach the feeding and discharging within the scope of 360b.
(7) Due to the big inclination conveying, when reach the same transport height, the length is shorten, so is the length of propylaea, which reduces the investment in equipment and engineering cost and the area.
(8) Large dip angle and short length. Compared with ordinary belt conveyor, sidewall belt conveyor with large dip angle can reduce the number of roller, conveyor belt length and material weight, which greatly reduce the resistance of roller and consume power of conveyor belt and material. Therefore, the machine can reduce energy consumption.
(9) When the machine in the vertical layout, general is fully enclosed, good sealed, little dust and environmental protection effect is remarkable.
(10) The lateral stiffness of the conveyor is stronger, the base band both have vertical roll running deviation, and the materials are to be delivered at the center of the conveyor. Therefore, the conveyor belt can run without running deviation.
没有评论:
发表评论